• A Full Colour Logo And The Simplified Version

July 24, 2018

Taking a Full Colour Logo and Making a Simplified Version

In order to create an impression in a cover or on a box, we make a metal die. To make this die we take a vector image (or very high resolution image) and create a photographic film positive (the opposite of a film negative).

What is transparent (clear) on the image is either chemically washed away or in the case of a CNC die, drilled out. What is covered by the dark, or black area of the film remains and from this is created a die plate or stamp.

hartnack and co metal die

We then attach the die plate to the hot plate of the stamping machine (above) and create either your emboss or foil stamp.

It is for this reason that full colour artwork or greyscale (B&W) artwork will not work as everything in the photo positive will be covered, there will be nothing left transparent and you'll get a black blob!

When printing colour you need 4 different dies or plates, one each for Cyan, Magenta, Yellow and Black. Even greyscale and black and white requires more than one die plate.

We are only making one die and that is why we need your artwork in a very simple all black and white format. It has to be positive reading, and what you want stamped must be in 100% black. It must be on a clear white or transparent background, (as that is the bit that is being either washed or drilled out).

This means that in some instances that we need a simplified version of a logo and nothing illustrates this better than a coat of arms.

Sample 1 - What we can't accept or use (because it's in full colour), is this below.

Sample 2 - Even in Greyscale or shaded black & white, is of no use.

Sample 3. What has to be sent is a simplified version of the above, which is this below.

As you can see from the above, there is no colour and no shades of grey. This is called a "Simplified" version of a logo and this is the version of what we need and what we can make your stamp or die out of.

So how do you go from example 1 or 2 and get to example 3? A good graphic designer will create a simplified version by re drawing your artwork or coat of arms and creating a simplified version. They MUST CREATE A VECTOR IMAGE of it as it can then be scaled bigger or smaller without losing definition. 

Don't worry, once it's done once, it's finished artwork, and will not need to be re-done.

Thanks to the University of Birmingham for the use of their logo.





Also in Bespoke Personalised Portfolios - Blog Posts

photographer jess farmers a3 leather photography portfolio book
Family Portrait Photographer, Jess Farmers' Leather Photography Portfolio

August 09, 2018

We've been very lucky to have found Photographer Jess Farmer. This is the story behind her photography portfolio and why without her, you would not be reading this.

Continue Reading

Art collectors clamshell box with matching leather album
Art Collectors Provenance Boxes

July 23, 2018

Bespoke boxes and portfolio for Alan Klinkhoff Galleries in Montreal, Canada. Each of the branded boxes is to be given to an individual collector of a particular artist, to keep the relevant paper work of their collection together (basically a provenance keeper or folder)

Continue Reading

Pilots log book - hidden screw post portfolio
Pilot Log Book

July 10, 2018

This pilot log book was an A4 landscape screw post portfolio to hold a record of all flying hours. The outer cover is an evening blue buckram, while the spine and inner cover are a charcoal black buckram. 

Continue Reading